Будь ласка, використовуйте цей ідентифікатор, щоб цитувати або посилатися на цей матеріал: http://ir.stu.cn.ua/123456789/25902
Повний запис метаданих
Поле DCЗначенняМова
dc.contributor.authorІванченко, А. В.
dc.contributor.authorСокол, О. Д.
dc.contributor.authorЄлатонцев, Д. О.
dc.contributor.authorЛяпка, К. О.
dc.contributor.authorРевак, О. А.
dc.date.accessioned2022-09-12T11:52:30Z
dc.date.available2022-09-12T11:52:30Z
dc.date.issued2021
dc.identifier.urihttp://ir.stu.cn.ua/123456789/25902
dc.descriptionІванченко, А. Застосування кислотно активованого цеоліту в технології очищення стічних вод від барвників / А. Іванченко, О. Сокол, Д. Єлатонцев, К. Ляпка, О. Ревак // Технічні науки та технології. – 2021. – № 4 (26). – С. 106-112.en_US
dc.description.abstractЗапропоновано використовувати спосіб очищення сорбентами, модифікованими мінеральними кислотами HNO3, НСl, H3PO4 з метою підвищення поглинаючої здатності щодо водорозчинних барвників. Охарактеризовано склад активованих сорбентів, експериментально проведено аналіз процесу очищення та ней- тралізації барвників у водних системах за допомогою цеоліту Сокернянського родовища. Використано хімічну акти- вацію, яка здійснювалась методом просочування. Перевірено ефективність використання кислотно активованих со- рбентів для вилучення барвника метилового оранжевого.en_US
dc.language.isouken_US
dc.publisherЧернігів : НУ "Чернігівська політехніка"en_US
dc.relation.ispartofseriesТехнічні науки та технології;№ 4 (26)
dc.subjectsorbenten_US
dc.subjectchemical activationen_US
dc.subjectzeoliteen_US
dc.subjectnitric aciden_US
dc.subjecthydrochloric aciden_US
dc.subjectorthophosphate aciden_US
dc.subjectimpregnation methoden_US
dc.subjectmethyl orangeen_US
dc.subjectсорбентen_US
dc.subjectхімічна активаціяen_US
dc.subjectцеолітen_US
dc.subjectнітратна кислотаen_US
dc.subjectхлоридна кислотаen_US
dc.subjectортофосфатна кислотаen_US
dc.subjectметод просочуванняen_US
dc.subjectметиловий оранжевийen_US
dc.titleЗастосування кислотно активованого цеоліту в технології очищення стічних вод від барвниківen_US
dc.title.alternativeApplication of acid-activated zeolite in dyes wastewater рurification technologiesen_US
dc.typeArticleen_US
dc.description.abstractalt1The work aims to study the process of activation of natural zeolite by inorganic acids, in particular, HNO3 and H3PO4 to verify their effectiveness when extracting dyes from aqueous media in batch mode. It is proposed to use the method of purification with sorbents modified with mineral acids nitric, hydrochloric, and orthophosphate to increase the absorption capacity concerning water-soluble dyes. The analysis of the process of purification and neutralization of dyes in water systems with the help of zeolite of the Sokernyanskoye deposit was carried out experimentally. Chemical activation, which was carried out by the impregnation method, was used to improve the sorption properties. Samples of chemically activated zeolite were obtained. Due to acid activation, Al, K, Na, Ca, Mg, Fe ions are released, which release micro- and mesopores in the sorbent, which increases its porosity and improves sorption properties. The composition of activated natural mineral zeolite with HNO3, HCl, H3PO4 acids were characterized. The chemical composition of activated zeolite was determined by X-ray fluorescence. The efficiency of acid-activated zeolite for the extraction of dyes from wastewater was tested. The dependences of the dye extraction process from model solutions using ordinary and acid-activated zeolite have been established. The dye content in the treated wastewater was determined by the photometric method. The kinetic regularities of the dye adsorption process during contact of natural and activated zeolite samples in the time interval every 6 h for 24 h have been established. It was found that the concentration of pollutants varies and depends on the type of acid and has a decisive influence on the obtained chemical properties of the modified samples. It is recommended to use zeolite activated with hydrochloric acid as a natural adsorbent at a dose of 4 g/dm3 with a contact time of 24 hours. According to these technological parameters, the dye content in water decreases from 117 mg/dm3 to 41 mg/dm3. The obtained results allow to significantly expand the knowledge about the areas of application of natural sorbents in various technological processes.en_US
Розташовується у зібраннях:Технічні науки та технології. – 2021. – №4 (26)

Файли цього матеріалу:
Файл Опис РозмірФормат 
Technical sciences and technologies 4(26)2021_печать-106-112.pdfстаття529,56 kBAdobe PDFПереглянути/Відкрити


Усі матеріали в архіві електронних ресурсів захищені авторським правом, всі права збережені.