IRCPNU
Institutional Repository of Chernihiv Polytechnic National University

Дослідження процесу іонного азотування в імпульсному тліючому розряді

ISSN 2415-363X

Show simple item record

dc.contributor.author Доненко, В. А.
dc.date.accessioned 2021-02-03T09:52:08Z
dc.date.available 2021-02-03T09:52:08Z
dc.date.issued 2020
dc.identifier.uri http://ir.stu.cn.ua/123456789/21033
dc.description Доненко, В. А. Дослідження процесу іонного азотування в імпульсному тліючому розряді : магістерська робота: 131 Прикладна механіка / В. А. Доненко; керівник роботи Болотов Г. П. ; Національний університет «Чернігівська політехніка», кафедра технологій зварювання та будівництва. – Чернігів, 2020. – 84 с. en_US
dc.description.abstract Магістерська робота складається з чотирьох розділів. У першій частині, теоретичній, розглянуті питання пов’язані з фізичними основами процесу іонного азотування, його переваги та недоліки, основні режими азотування деяких металів, дефекти азотування та їх запобігання. У другій частині роботи розглянуто обладнання на якому проводилися досліди, наведено його технічні характеристики. Розглянуто матеріал, що було обрано для дослідів. Розглянуто процес виготовлення зразків матеріалу, розроблена методика вимірювань контрольних зразків. У третій, експериментальній, частині роботи були приведені результати дослідів та режими азотування на яких проводився процес. Наведено фотознімки поверхневої структури зразків, числові значення твердості на різних режимах азотування, досліджено вплив параметрів режиму азотування на мікротвердість та мікроструктуру зразків. У четвертій частині роботи було розглянуто питання охорони праці на робочому місці оператора дифузійної вакуумної установки, проаналізовано основні небезпечні фактори та складено карту умов праці. en_US
dc.language.iso uk en_US
dc.publisher Чернігів en_US
dc.subject азотування en_US
dc.subject іонне азотування en_US
dc.subject азотування в тліючому розряді en_US
dc.subject мікротвердість en_US
dc.subject мікроструктура en_US
dc.subject режим іонного азотування en_US
dc.subject іонне азотування в імпульсному тліючому розряді en_US
dc.subject дифузійний шар en_US
dc.subject глибина дифузії азоту en_US
dc.subject нітриди en_US
dc.subject nitriding en_US
dc.subject ionic nitriding en_US
dc.subject nitriding in a glow discharge en_US
dc.subject microhardness en_US
dc.subject microstructure en_US
dc.subject ionic nitriding regime en_US
dc.subject ionic nitriding in a pulsed glow discharge en_US
dc.subject diffusion layer en_US
dc.subject nitrogen diffusion depth en_US
dc.subject nitrides en_US
dc.title Дослідження процесу іонного азотування в імпульсному тліючому розряді en_US
dc.type Thesis en_US
dc.description.abstractalt1 The master's dissertation consists of four parts. In the first part, theoretical, the issues are related to the physical basis of the ionic nitriding process, its advantages and disadvantages, the main modes of nitriding of some metals, nitriding defects and their prevention. In the second part of the work the equipment on which experiments were carried out is considered, its technical characteristics are resulted. The material selected for experiments is considered. The process of making material samples is considered, the method of measuring control samples is developed. In the third, experimental, part of the work, the results of experiments and nitriding modes on which the process was carried out were presented. Photographs of the surface structure of the samples, numerical values of hardness at different nitriding modes, the influence of the parameters of the nitriding mode on the microhardness and microstructure of the samples are investigated. In the fourth part of the work, the issue of labor protection at the workplace of the operator of the diffusion vacuum unit was considered, the main dangerous factors were analyzed and a map of working conditions was made. en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record