dc.contributor.author |
Дубіль, Д. М.
|
|
dc.date.accessioned |
2022-02-01T17:34:11Z |
|
dc.date.available |
2022-02-01T17:34:11Z |
|
dc.date.issued |
2021 |
|
dc.identifier.uri |
http://ir.stu.cn.ua/123456789/25295 |
|
dc.description |
Дубіль, Д. М. Дослідження процесу шліфування торців пружин : випускна кваліфікаційна робота : 133 "Галузеве машинобудування" / Д. М. Дубіль ; керівник роботи А. В. Кологойда ; НУ "Чернігівська політехніка", кафедра автомобільного транспорту та галузевого машинобудування. – Чернігів, 2021. – 78 с. |
en_US |
dc.description.abstract |
У випускній атестаційній роботі проаналізовано наукові розробки у галузі двостороннього торцевого шліфування пружин. В конструкторському розділі проведено аналіз базової моделі верстату 3342 АДО. Розглянуті його основні вузли. Запропонована конструкція спеціального пристрою для подачі пружин в зону шліфування. Проведено конструкторські розрахунки розробленого живильника, здійснено розрахунок статичної жорсткості, визначено реакції в опорах з метою якісного встановлення живильника. Проведено частотний аналіз конструкції. Запропоновано вибір форми затилочної поверхні на барабані подачі виробів, з умови більш плавного завантаження пружин, що покращить загальну якість обробки деталей. Визначено просторову математичну модульну модель пружини, що обробляється, розглянуто кінематичну схему базової моделі верстата 3342АДО та будову основних його вузлів. В роботі здійснено 3D моделювання запропонованої схеми обробки та визначені основні параметри процесу двостороннього торцевого шліфування. Проведено частотний аналіз шпинделя зі встановленим шліфувальним кругом, при цьому визначено АФЧХ системи, розраховані перші 5 власних частот коливань та побудовано власні форми коливань, що їм відповідають. |
en_US |
dc.language.iso |
uk |
en_US |
dc.publisher |
Чернігів |
en_US |
dc.subject |
пружина |
en_US |
dc.subject |
шліфування |
en_US |
dc.subject |
шліфувальний верстат 3342АДО |
en_US |
dc.subject |
шліфувальний круг |
en_US |
dc.subject |
3Д моделювання |
en_US |
dc.subject |
spring |
en_US |
dc.subject |
grinding |
en_US |
dc.subject |
grinding machine 3342АДО |
en_US |
dc.subject |
grinding wheel |
en_US |
dc.subject |
3D modeling |
en_US |
dc.title |
Дослідження процесу двостороннього шліфування торців пружин |
en_US |
dc.type |
Thesis |
en_US |
dc.description.abstractalt1 |
In the final attestation work the scientific developments in the field of bilateral end grinding of springs are analyzed. In the design section the analysis of the basic model of the 3342 ADO machine is carried out. Its main nodes are considered. The design of a special device for supplying springs to the grinding zone is proposed. Design calculations of the developed feeder are carried out, static rigidity is calculated, reactions in supports for the purpose of qualitative installation of the feeder are defined. Frequency analysis of a design is carried out. The choice of the shape of the occipital surface on the feed drum of the product is proposed, provided that the springs are loaded more smoothly, which will improve the overall quality of the parts. The spatial mathematical modular model of the processed spring is determined, the kinematic scheme of the basic model of the 3342ADO machine and the structure of its main units are considered. The paper performs 3D modeling of the proposed machining scheme and determines the main parameters of the process of double-sided end grinding. The frequency analysis of the spindle with the established grinding wheel is carried out, at the same time the AFCH of the system is determined, the first 5 natural frequencies of oscillations are calculated and the natural forms of oscillations corresponding to them are constructed. |
en_US |