dc.contributor.author |
Лебедєв, В. О.
|
|
dc.contributor.author |
Тищенко, В. О.
|
|
dc.contributor.author |
Лой, С. А.
|
|
dc.date.accessioned |
2022-09-14T08:29:32Z |
|
dc.date.available |
2022-09-14T08:29:32Z |
|
dc.date.issued |
2022 |
|
dc.identifier.uri |
http://ir.stu.cn.ua/123456789/25932 |
|
dc.description |
Лебедєв, В. Особливості структуроутворення металу при електродуговому механізованому наплавленні з модуляцією режимів / В. Лебедєв, В. Тищенко, С. Лой // Технічні науки та технології. - 2022. - № 1 (27). - С. 27-37. |
en_US |
dc.description.abstract |
У статті досліджено особливості забезпечення твердості поверхневого зміцнення деталей машин та механізмів з використанням способу наплавлення модульованим струмом. Представлені та проаналізовані результати експериментальних досліджень, отримані при наплавленні з модуляцією режимів дугового процесу з керованими характеристиками модульованого впливу. Розроблена математична модель залежностей твердості наплавлених шарів від основних параметрів модуляції. Для прикладу та візуалізації побудовані графіки таких залежностей. Розглянуті мікрошліфи наплавлень із визначенням особливостей структури металу. |
en_US |
dc.language.iso |
uk |
en_US |
dc.publisher |
Чернігів : НУ "Чернігівська політехніка" |
en_US |
dc.relation.ispartofseries |
Технічні науки та технології;№ 1 (27) |
|
dc.subject |
arc surfacing |
en_US |
dc.subject |
melting electrode |
en_US |
dc.subject |
modulation of modes |
en_US |
dc.subject |
parameters |
en_US |
dc.subject |
experiments |
en_US |
dc.subject |
processing of results |
en_US |
dc.subject |
mathematical models |
en_US |
dc.subject |
дугове наплавлення |
en_US |
dc.subject |
електрод, що плавиться |
en_US |
dc.subject |
модуляція режимів |
en_US |
dc.title |
Особливості структуроутворення металу при електродуговому механізованому наплавленні з моду- ляцією режимів |
en_US |
dc.title.alternative |
Features of structural formation of metal in electric arc мechanized surfaces with modulation modules |
en_US |
dc.type |
Article |
en_US |
dc.description.abstractalt1 |
The article investigates the features of ensuring the hardness of surface hardening and restoration of machine parts and
mechanisms using the method of modulated current surfacing. Preliminary research on methods and results of surface hardening
has been studied. A cycle of experiments was planned and performed using a number of variable parameters of the arc
process. The results of experimental researches received at surfacing with modulation of modes of arc process with the controlled
characteristics of the modulated influence are presented and analyzed. All studies for comparison were performed with
stationary and modulated processes. A mathematical model of the dependences of the hardness of the deposited layers on the
main modulation parameters has been developed. Regression analysis is used to create a mathematical model. Graphs of such
dependences are constructed for an example and visualization. Microsections of surfacing with definition of features of structure
of metal are considered. It is established that the parameters of modulation of surfacing modes significantly affect the
characteristics of the deposited layer and can be significantly improved. The research used common equipment - surfacing
machine and current source, as well as a special modulator and flux cored wire. The microsections of the sections of the welded
rollers made in comparison with the formation of certain conclusions about the structures of the surfacing metal are considered
and studied. Substantiated conclusions about the increase of hardness are the consequences of structural transformations of
the weld metal under the action of modulated influence. It is noted that the obtained results can serve as a basis for purposeful
selection of parameters of the modulated surfacing process to obtain a coating with a better layer, as well as to predict the
surfacing properties. Surfacing using a modulation cycle can be common in various industries. |
en_US |