dc.contributor.author |
Гупало, Ю. Ю.
|
|
dc.contributor.author |
Бельмас, І. В.
|
|
dc.contributor.author |
Білоус, О. І.
|
|
dc.contributor.author |
Танцура, Г. І.
|
|
dc.date.accessioned |
2022-09-14T09:51:01Z |
|
dc.date.available |
2022-09-14T09:51:01Z |
|
dc.date.issued |
2022 |
|
dc.identifier.uri |
http://ir.stu.cn.ua/123456789/25938 |
|
dc.description |
Гупало, Ю. Аналіз допустимих відхилень вузлів приєднання вантового канату до споруди / Ю. Гупало, І. Бельмас, О. Білоус, Г. Танцура // Технічні науки та технології. - 2022. - № 1 (27). - С. 67-73. |
en_US |
dc.description.abstract |
На основі метода механіки шаруватих композитних матеріалів була створена модель, яка здатна оцінити
вплив дефектів приєднання канату до залізобетонного покриття будівлі на його напружено деформований стан.
Отримані розрахунки дають можливість визначити допустиму похибку приєднання кінців канату до споруди, що
суттєво сприяє підвищенню безпеки експлуатації загалом. Вони надають можливість визначати допустиму похибку
приєднання кінців канату до споруди та сприяють підвищенню безпеки експлуатації останньої. Результати отримані методами механіки композитних матеріалів з використанням моделювання в системі Mathcad, що дозволяє вважати їх достатньо достовірними. |
en_US |
dc.language.iso |
uk |
en_US |
dc.publisher |
Чернігів : НУ "Чернігівська політехніка" |
en_US |
dc.relation.ispartofseries |
Технічні науки та технології;№ 1 (27) |
|
dc.subject |
permissible deviations |
en_US |
dc.subject |
stress-strain condition |
en_US |
dc.subject |
cable-stayed rope |
en_US |
dc.subject |
rotation angle |
en_US |
dc.subject |
internal load forces |
en_US |
dc.subject |
допустимі відхилення |
en_US |
dc.subject |
напружено-деформований стан |
en_US |
dc.subject |
вантовий канат |
en_US |
dc.subject |
кут повороту |
en_US |
dc.subject |
внутрішні сили навантаження |
en_US |
dc.title |
Аналіз допустимих відхилень вузлів приєднання вантового канату до споруди |
en_US |
dc.title.alternative |
Algorithm for determining permissible deviations оf cable rope connection nodes to structure |
en_US |
dc.type |
Article |
en_US |
dc.description.abstractalt1 |
One of the directions of modern capital buildings is reduce the cost of manufacturing construction products and increase
the reliability of its basic elements. In order to reduce the production time, manufacturing construction products should be
made of flat reinforced concrete elements connected to the spatial structure by cables.
Due to the reduction of the amount of time for the production of the main elements of construction, it becomes possible
to produce materials of low weight for the overlapping with the specified dimensions in the plan of structure. The main factor
of safe operation is the calculation of the nodes connecting the cable ropes to structure.
Analysis of recent achievements and publications has shown that the problem of determining the stress-strain state of the
cable rope is not solved, in the scientific literature insufficiently studied the effects of nodes on the state of the entire
prefabricated structure.
The aim of the article is study the influence of defects on the stress-strain state of cable ropes and develop a method for
determining allowable fluctuations of load and displacement forces between ropes for design nodes of connection.
Based on the method of mechanics of layered composite materials, a model is built, the influence of defects of its
connection to the stable reinforced concrete floor of building on stress-strain state of cable rope is established. Expressions
for determining the permissible rotation of the cross-section of the connected rope to the structure are formed. The mechanism
of influence of the nature of rope connection to the structure on its stress-strain state is specified.
The expressions for determination of admissible deviations of knots of connection of a cable rope to a building design
are received. This makes it possible to determine the permissible error of connecting the ends of the rope to the structure, which
improves operational safety. The results can be considered reliable because they are obtained by methods of mechanics of
composite materials using analytical results in a closed form. |
en_US |