Показати скорочений опис матеріалу
dc.contributor.author | Верба, І. І. | |
dc.contributor.author | Даниленко, О. В. | |
dc.contributor.author | Порхун, Н. Ф. | |
dc.date.accessioned | 2022-12-08T10:46:07Z | |
dc.date.available | 2022-12-08T10:46:07Z | |
dc.date.issued | 2022 | |
dc.identifier.uri | http://ir.stu.cn.ua/123456789/26339 | |
dc.description | Верба, І. Як обрати вібраційні опори для верстата? Питання без відповіді / І. Верба, О. Даниленко, Н. Порхун // Технічні науки та технології. - 2022. - № 2 (28). - С. 57-68. | en_US |
dc.description.abstract | Стаття є публікацією науково-методичного характеру, що висвітлює дослідження вібраційних опор, на яких може бути безпосередньо встановлено верстат. Наведені деякі рекомендації щодо обґрунтування вибору опор і підтвердження відповідності можуть стати у пригоді інженерно-технічним працівникам машинобудівних підприємств і конструкторам. Відзначено, що в інформаційних джерелах практично відсутня оновлена інформація з цього питання. Найліпший варіант – це обґрунтована експериментально рекомендація заводу-виробника щодо придатності обраних опор, але може застосовуватись для нових верстатів. Такий шлях не придатний, наприклад, у разі модернізації чи змінюванні умов експлуатації. Стаття є публікацією науково-методичного характеру. | en_US |
dc.language.iso | uk | en_US |
dc.publisher | Чернігів : НУ "Чернігівська політехніка" | en_US |
dc.relation.ispartofseries | Технічні науки та технології;№ 2 (28) | |
dc.subject | vibration support | en_US |
dc.subject | vibration isolation | en_US |
dc.subject | transmission of vibrations | en_US |
dc.subject | foundation of the machine | en_US |
dc.subject | elastic materials | en_US |
dc.subject | віброопора | en_US |
dc.subject | віброізоляція | en_US |
dc.subject | передача коливань | en_US |
dc.subject | фундамент верстата | en_US |
dc.subject | пружні матеріали | en_US |
dc.title | Як обрати вібраційні опори для верстата? Питання без відповіді | en_US |
dc.title.alternative | How to choose vibration supports for the machine? The question without the answer | en_US |
dc.type | Article | en_US |
dc.description.abstractalt1 | The article contains a scientific and methodical study on the installation of machines tool and other equipment directly on antivibration supports and the selection of specific types of these supports based on comparative evaluation and with confirmation of their compliance with operational requirements. The results of the research are relevant and can be applied by engineering and technical workers of machinery manufacturing plant in the case of modernization of existing equipment, primarily at small enterprises, since the solution of the problem should not involve complex dynamic studies and calculations that require appropriate specialists and equipment. The main attention is paid to consideration of different types of antivibration supports. The correct choice of supports makes it possible to isolate the equipment from the action of internal (caused by the design of the machine tool and the cutting process itself) and external vibrations and to ensure both the accuracy of the relative location and movement of the machine units, as well as the reduction of the level of elastic movements and amplitudes of oscillations. The best option is the experimentally based recommendation of the manufacturing plant regarding the suitability of the selected supports, but it is valid for new machines tool, and even then, the operating conditions are not properly considered. The analysis of information sources showed that, despite the presence of dynamic studies, the necessary information is missing or quite outdated and generalized, which allows it to be used as an estimate, but not as final. The recommendations need to be updated accordingly and reconciled with the requirements for modern machines tool. | en_US |