dc.contributor.author |
Набережна, О. О.
|
|
dc.date.accessioned |
2022-12-08T11:01:04Z |
|
dc.date.available |
2022-12-08T11:01:04Z |
|
dc.date.issued |
2022 |
|
dc.identifier.uri |
http://ir.stu.cn.ua/123456789/26340 |
|
dc.description |
Набережна, О. УЗК-дослідження впливу вуглецевих волокон на властивості вуглепластиків на основі поліфеніленсульфіду / О. Набережна // Технічні науки та технології. - 2022. - № 2 (28). - С. 69-75. |
en_US |
dc.description.abstract |
У роботі розглянуто суперконструкційні пластики (поліфеніленсульфід) і отримані за рахунок армування вуглецевим волокном – вуглепластики. У статті представлені результати механічних випробувань поліфеніленсульфіду
та вуглепластиків на його основі, визначені основні показники: міцність, відносна деформація і модуль пружності,
мікротвердість. Показано, що для оцінки міцнісних характеристик композицій на основі ПФС може використовуватися метод акустичної дефектоскопії – ультразвуковий контроль. Запропонований неруйнівний підхід дослідження
вуглепластиків на основі ПФС, який за результатами корелює з лабораторними дослідженнями властивостей матеріалів. Наведено імпульси відбитих «донних» сигналів і визначено швидкість поширення хвилі в матеріалі. |
en_US |
dc.language.iso |
uk |
en_US |
dc.publisher |
Чернігів : НУ "Чернігівська політехніка" |
en_US |
dc.relation.ispartofseries |
Технічні науки та технології;№ 2 (28) |
|
dc.subject |
polyphenylene sulfide |
en_US |
dc.subject |
carbon fiber |
en_US |
dc.subject |
polymer composite material |
en_US |
dc.subject |
strength characteristics |
en_US |
dc.subject |
ultrasonic flaw detection |
en_US |
dc.subject |
поліфеніленсульфід |
en_US |
dc.subject |
вуглецеве волокно |
en_US |
dc.subject |
вуглепластик |
en_US |
dc.subject |
полімерний композиційний матеріал |
en_US |
dc.subject |
характеристики міцності |
en_US |
dc.subject |
ультразвукова дефектоскопія |
en_US |
dc.title |
УЗК-дослідження впливу вуглецевих волокон на властивості вуглепластиків на основі поліфеніленсульфіду |
en_US |
dc.title.alternative |
Ultrasound research of the influence of сarbon fibers on the properties of carbon plastic based on polyphenylene sulphide |
en_US |
dc.type |
Article |
en_US |
dc.description.abstractalt1 |
Polyphenylene sulfides are one of the plastics with truly outstanding characteristics. The introduction of carbon fibers
into the composition of the matrix contributes to the expansion of their potential use. The main requirement for the obtained
materials is to increase their strength indicators due to the reinforcement of the matrix frame with carbon fibers.
Carbon plastics are distinguished among other composite materials by high specific strength and stiffness, low coefficients
of linear thermal expansion and friction, high wear resistance and resistance to aggressive environments. This allows
their use in defense industries and, above all, in aviation and rocket engineering.
The analysis of the latest research and publications showed that the issue of selection and distribution of carbon fiber
has a strong influence on the final indicators of the material's properties. To improve the operational characteristics, discrete
carbon fibers were introduced into the composition of polyphenylene sulfide. The main goal of this method of obtaining composites
was the uniform distribution of fibers in the polymer matrix.
The article presents the results of mechanical tests of polyphenylene sulfide and carbon plastics based on it, the main
indicators are determined: strength, relative deformation and modulus of elasticity, microhardness. It is shown that the method
of acoustic defectoscopy - ultrasonic control can be used to assess the strength characteristics of compositions based on polyphenylene
sulfide. A non-destructive approach to the study of carbon plastics based on polyphenylene sulfide is proposed,
which results correlate with laboratory studies of material properties. The pulses of the reflected "bottom" signals are given
and the speed of wave propagation in the material is determined.
The analysis of the physical and mechanical properties showed that the resulting carbon-plastics are characterized by
fairly high strength indicators, which makes it possible to recommend them for replacing thermoplastic and thermosetting
polymers, especially in machine building. |
en_US |