dc.contributor.author |
Карпеченко, А.
|
|
dc.contributor.author |
Макруха, Т.
|
|
dc.contributor.author |
Дубовий, О.
|
|
dc.contributor.author |
Бобров, М.
|
|
dc.date.accessioned |
2022-12-13T08:40:49Z |
|
dc.date.available |
2022-12-13T08:40:49Z |
|
dc.date.issued |
2022 |
|
dc.identifier.uri |
http://ir.stu.cn.ua/123456789/26355 |
|
dc.description |
Карпеченко, А. Наноструктурування кристалічних матеріалів та напилених покриттів передрекристалізаційною термічною обробкою / А. Карпеченко, Т. Макруха, О. Дубовий, М. Бобров // Технічні науки та технології. - 2022. - № 3 (29). - С. 27-36. |
en_US |
dc.description.abstract |
У статті висвітлено доцільність застосування передрекристалізаційної термічної обробки (ПТО) попередньо
деформованих технічно чистого заліза, вуглецевих та легованих сталей для підвищення їхньої твердості за рахунок
формування полігонізаційної субструктури, здебільшого нанорозмірної. Показано, що збільшення вмісту вуглецю та
хрому у сталях, при короткочасній витримці при температурі рекристалізації, призводить до зниження приросту
твердості. Комбіноване деформування (динамічне та статичне) надає можливість збільшити час витримки до 60 хв
за рахунок формування термічно стабільної полігонізаційної субструктури. Визначено оптимальний режим ПТО теплозахисного плазмового покриття, що забезпечує підвищення твердості на 13 % та зниження теплопровідності
керамічного шару на 15 % у порівнянні зі станом після напилення за рахунок субструктурних змін. |
en_US |
dc.language.iso |
uk |
en_US |
dc.publisher |
Чернігів : НУ "Чернігівська політехніка" |
en_US |
dc.relation.ispartofseries |
Технічні науки та технології;№ 3 (29) |
|
dc.subject |
pre-recrystallization heat treatment |
en_US |
dc.subject |
substructure |
en_US |
dc.subject |
nano-sized elements |
en_US |
dc.subject |
heat protective coatings |
en_US |
dc.subject |
hardness |
en_US |
dc.subject |
thermal conductivity |
en_US |
dc.subject |
передрекристалізаційна термічна обробка |
en_US |
dc.subject |
субструктура |
en_US |
dc.subject |
нанорозмірні елементи |
en_US |
dc.subject |
теплозахисні покриття |
en_US |
dc.subject |
твердість |
en_US |
dc.subject |
теплопровідність |
en_US |
dc.title |
Наноструктурування кристалічних матеріалів та напилених покриттів передрекристалізаційною термічною обробкою |
en_US |
dc.type |
Article |
en_US |
dc.description.abstractalt1 |
Modern production requires the improvement and creation of materials with unique properties, and their use in structures
is determined by the ratio between strength and plasticity, therefore metal materials are characterized by the most attractive
ratio from the point of view of practical expediency. The increase in strength properties is ensured mainly due to the purposeful
formation of a crushed structure.
Analysis of the latest research and publications showed that methods of thermomechanical processing of materials remain
promising for the formation of ultra- and nanostructures in metallic materials.
The purpose of the work is to establish the patterns of changes in the structure and properties of crystalline materials
after deformation and pre-recrystallization heat treatment.
The work presents methods for determining the strength properties of metal materials and determining the size of their
structural elements.
The article highlights the feasibility of using pre-recrystallization heat treatment of previously deformed technically pure
iron (GOST 3836-83), carbon steels 20, 45 (GOST 1050-88) and U8 (GOST 1435-88), alloy steels 40X (GOST 2591-2006),
12X13 and 12X18N9T (GOST 2590-2006) to increase their hardness due to the formation of a thermally stable polygonization
substructure, mostly on of a nanoscale. It is shown that an increase in the content of carbon and chromium in steels during
short-term exposure at a temperature that corresponds to the temperature threshold of recrystallization of the mentioned steels
leads to a decrease in the increase in their hardness. Combined deformation, which consists of dynamic deformation by 30%
followed by static deformation by 30%, provides an opportunity to increase the exposure time for technically pure iron, carbon
and alloy steels up to 60 minutes due to the formation of a thermally stable polygonization substructure in the process of their
pre-recrystallization heat treatment. It was established that the increase in hardness of technically pure iron, steel 20 and 45
decreases with an increase in the amount of carbon, and the increase in hardness of chromium-alloyed steels increases with an
increase in the amount of chromium. The optimal mode of pre-recrystallization heat treatment of a heat-protective plasma
coating with ZrO2 + 7% Y2O3 was determined, which provides an increase in hardness by 13% and a decrease in the thermal
conductivity of the ceramic layer by 15% compared to the state after sputtering due to substructural changes. |
en_US |