dc.contributor.author |
Швець, С.
|
|
dc.date.accessioned |
2023-05-09T09:11:19Z |
|
dc.date.available |
2023-05-09T09:11:19Z |
|
dc.date.issued |
2023 |
|
dc.identifier.uri |
http://ir.stu.cn.ua/123456789/27596 |
|
dc.description |
Швець, С. Математична модель визначення подачі і швидкості різання / С. Швець // Технічні науки та технології. - 2023. - № 1 (31). - С. 46-51. |
uk_UA |
dc.description.abstract |
На основі аналізу геометрії утворення висоти шорсткості обробленої поверхні в роботі представлено методику
аналітичного розрахунку подачі при визначенні параметрів режиму різання. Уперше запропоновано загальний підхід,
який пов’язує значення подачі й параметр шорсткості поверхні Rz. Створені аналітичні залежності й алгоритм застосування тієї з них, яка відповідає конкретній ситуації. Запропонована математична модель визначення оптимального значення швидкості різання. Запропонована математична модель визначення оптимального значення швидкості різання з урахуванням роботи зношування леза. |
uk_UA |
dc.language.iso |
uk |
uk_UA |
dc.publisher |
Чернігів : НУ "Чернігівська політехніка" |
uk_UA |
dc.relation.ispartofseries |
Технічні науки та технології;№ 1 (31) |
|
dc.subject |
cutting depth |
uk_UA |
dc.subject |
innings |
uk_UA |
dc.subject |
cutting speed |
uk_UA |
dc.subject |
blade wear work |
uk_UA |
dc.subject |
roughness parameter |
uk_UA |
dc.subject |
глибина різання |
uk_UA |
dc.subject |
подача |
uk_UA |
dc.subject |
швидкість різання |
uk_UA |
dc.subject |
робота зношування леза |
uk_UA |
dc.subject |
параметр шорсткості |
uk_UA |
dc.title |
Математична модель визначення подачі і швидкості різання |
uk_UA |
dc.title.alternative |
Mathematical model for determining feed and cutting speed |
uk_UA |
dc.type |
Article |
uk_UA |
dc.description.abstractalt1 |
The parameters of the cutting mode play an important role in ensuring the stability of cutting tools, quality and cost of
products. Therefore, determining their optimal values is a primary task in the development of a technological process, and,
therefore, the topic of research is relevant.
When designing technological processes of metal processing, the task of choosing the values of cutting depth, feed
and cutting speed inevitably arises. At this time, the cutting depth and feed are assigned depending on the requirements for
the quality of the treated surface. After that, taking into account these parameters and the recommended limit values
practically determine the cutting speed. The problem is the lack of analytical expressions for calculations of feed and
nominal values of cutting speed.
The analysis of the latest research and publications showed that a lot of attention is paid to the selection of parameters
of the cutting mode. However, analytical methods for determining feed and cutting speed have not been created.
The purpose of the article is to increase the accuracy of determining the parameters of the cutting mode based on the use
of mathematical dependencies.
Based on the analysis of the geometry of the formation of the height of the roughness of the machined surface, the work
presents the method of analytical calculation of feed when determining the parameters of the cutting mode. For the first time,
a general approach that relates the feed value and the surface roughness parameter was proposed. Analytical dependencies
and an algorithm for applying one of them that corresponds to a specific situation have been created. A mathematical model
for determining the optimal value of the cutting speed is proposed. This allows you to solve the problem of calculating
parameters of the cutting mode.
In the work, for the first time, an analytical calculation of feed during metal cutting is proposed. A mathematical model
for determining the optimal value of the cutting speed, taking into account the work of blade wear, is proposed. |
uk_UA |