dc.contributor.author |
Клименко, С.
|
|
dc.contributor.author |
Клименко, С.
|
|
dc.contributor.author |
Копєйкіна, М.
|
|
dc.contributor.author |
Манохін, А.
|
|
dc.contributor.author |
Полонський, Л.
|
|
dc.date.accessioned |
2023-11-06T09:43:54Z |
|
dc.date.available |
2023-11-06T09:43:54Z |
|
dc.date.issued |
2023 |
|
dc.identifier.uri |
http://ir.stu.cn.ua/123456789/28976 |
|
dc.description |
Клименко, С. Вихідні передумови розробки технології точіння наплавлених деталей / С. Клименко, С. Клименко, М. Копєйкіна, А. Манохін, Л. Полонський // Технічні науки та технології. - 2023. - № 2 (32). - С. 42-51. |
uk_UA |
dc.description.abstract |
Визначено вихідні передумови розробки технології точіння наплавлених деталей, які включають розрахунок припусків та граничних розмірів виробу відповідно до технологічних переходів і товщини наплавленого покриття. Наведений
підхід до встановлення глибини різання, яка забезпечує наявність у шарі покриття на обробленій деталі найкращих і
найбільш сталих властивостей, що надає виробу кращі експлуатаційні показники, зокрема більшу зносостійкість. У
загальному вигляді середня глибина різання може бути визначена за допомогою кривої відносної опорної поверхні профілю
покриття, а з урахуванням методу Херста змінну частину глибини різання під час оброблення покриттів може бути
визначено через фрактальну розмірність профілю їхньої поверхні. Розглянуто деякі підходи до визначення швидкості
різання, які базуються на вимогах забезпечення якості шару наплавленого покриття і стійкості різального інструменту,
та геометричних параметрів інструменту з урахуванням властивостей оброблюваного матеріалу. |
uk_UA |
dc.language.iso |
uk |
uk_UA |
dc.publisher |
Чернігів : НУ "Чернігівська політехніка" |
uk_UA |
dc.relation.ispartofseries |
Технічні науки та технології;№ 2 (32) |
|
dc.subject |
deposited part |
uk_UA |
dc.subject |
machining allowance |
uk_UA |
dc.subject |
cutting mode parameters |
uk_UA |
dc.subject |
geometric parameters of tool |
uk_UA |
dc.subject |
наплавлена деталь |
uk_UA |
dc.subject |
припуск на механічну обробку |
uk_UA |
dc.subject |
параметри режиму різання |
uk_UA |
dc.subject |
геометричні параметри інструменту |
uk_UA |
dc.title |
Вихідні передумови розробки технології точіння наплавлених деталей |
uk_UA |
dc.title.alternative |
Initial prerequisites for the development of technology for turning welded parts |
uk_UA |
dc.type |
Article |
uk_UA |
dc.description.abstractalt1 |
The initial prerequisites for the development of technology for turning welded parts are determined, which include the
calculation of allowances and boundary dimensions of the product in accordance with technological transitions and the thickness
of the welded coating. An approach to setting the depth of cut is proposed, which ensures that the coating layer on the
machined part has the best and most stable properties, which gives the product better performance, in particular, greater wear
resistance. In general, the average depth of cut can be determined using the curve of the relative bearing surface of the coating
profile, and, taking into account the Hirst method, the variable part of the depth of cut during coating processing can be
determined through the fractal dimension of the surface profile. Some approaches to determining the cutting speed based on
the requirements for ensuring the quality of the deposited coating layer and the stability of the cutting tool, as well as the
geometric parameters of the tool, taking into account the properties of the material being processed, are considered. |
uk_UA |