dc.contributor.author |
Лавріненко, В.
|
|
dc.contributor.author |
Ільницька, Г.
|
|
dc.contributor.author |
Солод, В.
|
|
dc.date.accessioned |
2024-04-29T13:31:32Z |
|
dc.date.available |
2024-04-29T13:31:32Z |
|
dc.date.issued |
2024 |
|
dc.identifier.uri |
http://ir.stu.cn.ua/123456789/30051 |
|
dc.description |
Лавріненко, В. Сучасні напрацювання в нанесенні металічних покриттів на зерна шліфпорошків алмазів для шліфувального інструменту / В. Лавріненко, Г. Ільницька, В. Солод // Технічні науки та технології. - 2024. - № 1 (35). - С. 48-56. |
uk_UA |
dc.description.abstract |
У статті подані сучасні матеріалознавчі напрацювання спрямовані на зміну властивостей алмазних зерен підвищеної міцності АС15–АС32 для підвищення їх ефективного застосування в шліфувальному інструменті. Авторами
для цього застосовані металічні покриття на зернах. Наведені сучасні розробки з технологій нанесення металічних
покриттів та вибору їхнього складу. Показана ефективність нанесення комбінованого Ni–Al покриття на алмазні
зерна, а також застосування при цьому в покритті домішок нанопорошків вуглецевих трубок. |
uk_UA |
dc.language.iso |
uk |
uk_UA |
dc.publisher |
Чернігів : НУ "Чернігівська політехніка" |
uk_UA |
dc.relation.ispartofseries |
Технічні науки та технології;№ 1 (35) |
|
dc.subject |
metal coatings |
uk_UA |
dc.subject |
carbon nanotubes |
uk_UA |
dc.subject |
diamond grains |
uk_UA |
dc.subject |
combined coating |
uk_UA |
dc.subject |
grinding tool |
uk_UA |
dc.subject |
металічні покриття |
uk_UA |
dc.subject |
алмазні зерна |
uk_UA |
dc.subject |
комбіноване покриття |
uk_UA |
dc.subject |
шліфувальний інструмент |
uk_UA |
dc.title |
Сучасні напрацювання в нанесенні металічних покриттів на зерна шліфпорошків алмазів для шліфувального інструменту |
uk_UA |
dc.title.alternative |
Modern developments in the application of metallic coatings on the grains of diamond grinding powder for grinding tools |
uk_UA |
dc.type |
Article |
uk_UA |
dc.description.abstractalt1 |
The development of tool production, the need for effective processing of new difficult-to-process materials, and the search
for ways to save energy dictate the need to obtain composite coatings on the grains of diamond grinding powders with new
properties and their increased diamond content.
One of the ways to increase the wear resistance of a diamond tool is to improve the retention of diamonds in the bond
through the metallization of diamonds with various combined coatings. This is especially relevant for high-strength diamond
grains (АС15–АС32).
The above analysis of recent research and publications has shown that considerable attention is paid to the application
of metallic coatings on diamond grains. At the same time, there are no studies of the features of coating on diamonds with
different content of impurities (magnetic and non-magnetic diamonds) and the formation of combined coatings with the content
of carbon nanotubes.
The purpose of the article is to study the features of coating on diamonds with different content of impurities (magnetic
and non-magnetic diamonds) and the formation of combined coatings with the content of carbon nanotubes on synthetic diamonds
of the AS20 grade of 100/80 grain size and to identify the properties of such coatings and the wear resistance of a
grinding tool with diamond grains with such coatings.
The article presents modern material science developments aimed at changing the properties of high-strength diamond
grains АС15–АС32 to increase their effective use in grinding tools. The authors used metal coatings on grains for this. The
modern developments in the technology of applying metal coatings and choosing their composition are presented. The
effectiveness of applying a combined Ni–Al coating on diamond grains is shown, as well as the use of carbon nanotubes in
the coating.
It was established that the relative costs of diamonds in wheels with Ni and Ni-Al metallized diamonds with carbon
nanotube additives when grinding a hard alloy are significantly lower compared to wheels with original diamond powders
coated without carbon nanotubes. The best coating is Ni–Al+carbon nanotubes. The presented materials can be used for a
reasoned choice of the metallized coating of diamond grains in order to increase the efficiency of the use of diamond grinding
wheels in industry. |
uk_UA |