ISSN 2415-363X

Перегляд 2020 за назвою

Сортувати за: Впорядкувати за: Результатів на сторінці:

  • Additional modules for programmable logic controller based training stands 
    Kelemen, Michal; Ligušová, Jana; Liguš, Jan; Maxim, Vladislav (НУ «Чернігівська політехніка», 2020)
    The main goal is to create a compact device with real models of actuators and sensors for training future application developers with a programmable logic controller. Such real objects as actuators and sensors have ...
  • Analysis of existing drive unit solutions for the pneumobile project 
    Тулея, Петер (НУ «Чернігівська політехніка», 2020)
    The aim of the article is to acquaint the public with the results and the ways in which they were achieved. It is also a kind of invitation for potential people interested in this issue.
  • Approaches for the 3d camera system image processing at automated workplaces 
    Vagas, Marek; Šeminský, Jaroslav (НУ «Чернігівська політехніка», 2020)
    В опублікованій статті представлено доступне за ціною рішення, яке можна застосувати на автоматизованому робочому місці. У представленій статті більш детально розглядаються деякі рішення для обробки зображень, що стосуються ...
  • Artificial intelligence face recognition for authentication 
    Хорольська, К. В.; Десятко, А. М.; Котенко, Н. О. (Чернігів: ЧНТУ, 2020)
    Urgency of the research. Technical progress leads to a tremendous increase in number of cybercrimes. Almost every person around the globe has a range of digital accounts containing sensitive private information which is ...
  • Automobile powered by compressed AIR, pneumatic car 2020 
    Марцінко, Пітер; Гайдук, Мікулаш (НУ «Чернігівська політехніка», 2020)
    This article describes the design of a pneumatic car for competitions. The competition focus is cars powered by compressed air. The pneumatic cars were developed by bachelors and technical school. The design of this car ...
  • Computer simulation and analytical solution of four bar mechanism 
    Гронцова, Д. (НУ «Чернігівська політехніка», 2020)
    The task was to create a computer model in MSC Adams and Matlab and to perform a four-bar linkage mechanism kinematic analysis. At the same time the classical procedure of analytical methods of kinematic analysis was ...
  • Controller design for dc motor 
    Miková, L. (НУ «Чернігівська політехніка», 2020)
    The main aim was to create control of a DC motor using a PI controller. The proposed control system regulates the motor speed with zero control deviation
  • Design of assembly robotized workplace 
    Семйон, Ян; Гриз, Любомир; Кочан, Мартін; Воронько, Олександр (НУ «Чернігівська політехніка», 2020)
    In this work shows the solution to an important technical problem. The functional of assembly robotic workplace using an affordable SCARA robot from the Dobot company were designed. The designed workplace allows pressing ...
  • Design of the handling process at the workplace with ABB robot and modular conveyor 
    Семйон, Ян; Фуфал, Мартін; Кочан, Мартін (НУ «Чернігівська політехніка», 2020)
    The article describes the modification of a modular conveyor for the needs of a robotic workplace equipped with a parallel robot. The workplace is equipped with an IRB 360/3 - 1130 robot, a Bosch modular conveyor equipped ...
  • Design, manufacturing and problem analysis of an entirely FDM 3D printed linear pneumatic actuator 
    Філаковський, Філіп; Варга, Мартін (НУ «Чернігівська політехніка», 2020)
    The analysis consists of an attempt to manufacture a simple prototype of full plastic 3d printed linear actuators without the use of postprocessing techniques and establishing a baseline for further research. In this ...
  • Development of the automated information system for organization’s information security culture level assessment 
    Литвинов, В. В.; Дорош, М. С.; Білоус, І. В. (Чернігів: ЧНТУ, 2020)
    Relevance of the research. Ensuring the effectiveness of the information security systems requires creation of an appropriate information security culture for the employees of the organization in order to reduce human-related ...
  • Displacement measurement using the hall effect sensors 
    Kelemenová, Tatiana; Benedik, Ondrej (НУ «Чернігівська політехніка», 2020)
    The Hall effect with ratiometric voltage output have been explored. So, it is analogue sensors with voltage reaction to changed displacement
  • Experimental method for verification of performance criteria of the industrial robots 
    Марцінко, Петер; Кощак, Юрай (НУ «Чернігівська політехніка», 2020)
    Since there is a robot in the department with positioning inaccuracies, it was decided to try to create a suitable tool that would be able to analyse this robot in more detail and obtain data on working characteristics
  • Identification of condition of linear displacement sensor 
    Kelemenová, T.; Koláriková, I.; Benedik, O. (НУ «Чернігівська політехніка», 2020)
    Gauge length blocks have been used for verification of investigated sensor. The set of gauge length blocks of grade “0” has been used, which are preferred mainly for calibration or verification purposes. Maximum ...
  • Manipulation task realised by the vacuum suction cup implementation 
    Тулея, Петер; Джоббегі, Борис (НУ «Чернігівська політехніка», 2020)
    The conclusions resulting from the article offer instructions for solving a set of problems in the design of vacuum gripping effectors with suction cups
  • Modelling of robot manipulation in integrated production 
    Янош, Рудольф (НУ «Чернігівська політехніка», 2020)
    This paper focuses on the integrated and logistic of the style of material flow, suitable for realization manufacturing and logistics network. Solution base is defining of mission, objectives and goal integrated of the ...
  • Oxidative-organosolvent delegification of wheat straw 
    Трембус, І. В.; Cемененко, Н. В. (Чернігів: ЧНТУ, 2020)
    Urgency of the research. Expansion of the raw material base of the pulp and paper industry of Ukraine takes place through the use of alternative types of vegetable raw materials, namely wheat straw, and the improvement of ...
  • Portable electrocardiograph with gsm module for telemedicine 
    Собянін, І. В.; Сконечний, В. В.; Ярова, І. А. (Чернігів: ЧНТУ, 2020)
    Urgency of the research. The principles of telemedicine need to be put into practice of emergency medical care and family medicine, so there is a need for diagnostic medical equipment with the ability of data transfer and ...
  • Possibilities of convert cad models for real time rendering software 
    Прада, Ерік; Коларж, Адам (НУ «Чернігівська політехніка», 2020)
    Possibilities of using the game engine Unreal Engine and the Epic Games addon DATASMITH for conversion CAD models for real time rendering software are presented in article
  • Possibilities of stress measurement in structures using modern technologies 
    Шарга, Патрик; Студений, Мартін (НУ «Чернігівська політехніка», 2020)
    In our work were used components from Arduino, which is the world’s leading open-source hardware and software ecosystem. The company offers a range of software tools, hardware platforms and documentation enabling almost ...