Короткий опис(реферат):
It was found that the modification of commercial activated carbon grades F400 and AS-CS with ferric oxide obtained
from alumina production waste "red mud" allows increasing the sorption capacity of activated carbon grade F400 to 60.241
mg/g (2 times). At the same time, the maximum sorption capacity of activated carbon AS-CS increases almost 7 times. The
content of Fe2O3 fixed in the structure of activated carbon reaches 9.14%. It has been established that the modification forms
an additional number of phenolic groups on the surface of the material, which contributes to an increase in the anion exchange
capacity of the sorption material by 2.55 times. The sorption material is effective for removing phosphorus compounds from
water at the level of 88.1% and can be recommended for use in the treatment of industrial water.
Суть розробки, основні результати:
Kosogina, I., Fedenko, Yu., Usova, N. (2024). Comparative characterization of sorption efficiency of activated carbon samples modified with Fe2O3. Technical sciences and technologies, (1(35)), 190-197.